Rochester Sensors|FOZTLL155-5B-0500-70
ROCHESTER SENSORS TLL155 Capacitive Cut-to-Length Fuel Level Sensor
Tax excluded. Shipping calculated at checkout
GST (10%) is calculated at checkout. Tax invoices provided with all orders.
Ships ex WA Stock
Held in stock in Western Australia and dispatched via overnight freight. Live delivery times to your address are shown at checkout; freight is quoted for remote sites.
Ships from Brisbane warehouse. Standard delivery 2-5 business days Australia-wide.
CUT-TO-LENGTH CAPACITIVE SENSING WITH NO MOVING PARTS
Capacitive fuel level sensor with no moving parts, cut-to-length on site to suit your tank. Onsite magnetic calibration, 1/2" BSPT thread. Resistive 10-180Ω or 4-20mA output, in 500mm and 1000mm lengths. A 0-5V output (TLL156) is available on request.
One sensor, cut to your tank
Capacitive sensing has no float and no moving parts, so the probe simply trims to the depth you need on site. The 500mm and 1000mm bodies cover the vast majority of fuel and oil tanks.
Magnetic set-up, no PC needed
Set empty and full with the onsite magnetic calibration kit. Choose resistive 10-180Ω to drive a standard gauge, or 4-20mA to feed a controller or telemetry.
Features & Benefits
Key Features
- Capacitive sensing with no moving parts
- Cut-to-length on site to suit the tank
- Onsite magnetic calibration, no tools or PC required
- 1/2" BSPT thread
- Resistive 10-180Ω or 4-20mA output (0-5V on request)
- Available in 500mm and 1000mm lengths
Benefits
- One sensor trims to fit any tank up to the chosen length
- No moving float to stick, wear or foul
- Magnetic calibration sets empty and full on site in minutes
| Type | Capacitive liquid level sensor (cut-to-length) |
| Moving parts | None |
| Thread | 1/2" BSPT |
| Calibration | Onsite magnetic |
| Length | 500mm or 1000mm (cut to suit) |
| Output | Resistive 10-180Ω, 4-20mA, or 0-5V (on request) |
Shipping & Dimensions
Dispatched from our WA stock via overnight freight. Live delivery times to your address are shown at checkout; freight quoted for remote sites.
Downloads
Compatible Products
Frequently Asked Questions
Can't find your answer?
Contact UsHow is the sensor cut to length?
The probe is trimmed on site to suit your tank depth using the calibration/cutting kit (FOZS/K155), then calibrated magnetically. Order the cutting kit and the connector kit (FOZC/K16) alongside the sensor.
Which output should I choose?
Resistive 10-180Ω suits standard dash and panel gauges; 4-20mA suits controllers, PLCs and telemetry. A 0-5V version (TLL156) is available on request.
Does it have a moving float?
No. It is a capacitive sensor with no moving parts, so there is no float to stick, wear or foul.