Kelco|UB25-B-D
Kelco UB25-B-D Flow Switch DN25 (1") Brass Body Reed Switch
Tax excluded. Shipping calculated at checkout
GST (10%) is calculated at checkout. Tax invoices provided with all orders.
In Stock
Ready for dispatch from GO Industrial. We co-ordinate freight end-to-end, direct to your site, business or home.
Ships from Brisbane warehouse. Standard delivery 2-5 business days Australia-wide.
AUSTRALIAN-MADE FLOW SENSING FOR FUEL, WATER, AND PRESSURE-BOOST PUMPS
Australian-made inline flow switch, brass body, IP67. SPST NO reed (B) tuned for diesel and oil applications. 1.5 L/min trigger, 200 BAR rating, 1" BSPT.
BUILT IN AUSTRALIA, USED EVERYWHERE
Kelco has been making the UB-series flow switches in Australia for over 30 years. The body is machined from solid brass on a single piece, the piston runs on high-power magnets, and there are no springs in the wet area - the design that gives the switch its reputation for outlasting cheap imports.
DESIGNED FOR DIESEL AND OIL
The -D variant uses a Nylon piston that suits diesel, light fuels, and lubricants. Pair the brass body with a compatible reed module and you have a reliable switch for fuel pump control, dispenser interlocks, and bulk-storage low-flow alarms.
Features & Benefits
Key Features
- Australian-made by Kelco for harsh-duty service
- Solid machined brass body, IP67 weatherproof housing
- Magnetic piston-style sensor with no springs in the wet area
- 200 BAR (2900 PSI) pressure rating, liquids up to 90 deg C
- 1" BSPT male inlet, 1" BSPT female outlet for 20NB or 25NB pipework
- Mounts in any orientation including upside down
Benefits
- Switches at very low flows - 1.5 L/min on the standard piston
- Dieseline (D) module variant suits diesel and oil applications
- SPST NO reed contact rated 240V AC / 200V DC at 1 amp resistive
- Suits PLC control, pressure boosting, safety showers, wash-down pumps
- 20mm cable gland accepts conduit or cable entry
- Magnetically isolated piston for exceptional service life
| Switching Point (Rising Flow) | 1.5 L/min +/-15% |
| Switching Point (Falling Flow) | 1.2 L/min +/-15% |
| Pressure Rating | 200 BAR / 2900 PSI |
| Max Liquid Temperature | 90 deg C |
| Switch Type | SPST NO Dry Reed |
| Switched Power Max | 40 W |
| Switched Voltage Max | 240 V AC / 200 V DC |
| Switched Current Max | 1 A resistive |
| Cable Entry | 20 mm cable gland |
| Body Material | Brass (machined from solid) |
| Piston | Glass-reinforced Polypropylene (water) or Nylon (oil) |
| Inlet | 1" BSPT male |
| Outlet | 1" BSPT female |
| Pipework Compatibility | 20NB (3/4") or 25NB (1") |
| IP Rating | IP67 |
| Dimensions | 127 L x 50 W x 93.5 H mm |
| Weight | 1.2 kg |
| Country of Origin | Australia |
Shipping & Dimensions
Ships from Brisbane warehouse. Standard delivery 2-5 business days.
Downloads
Compatible Products
Frequently Asked Questions
Can't find your answer?
Contact UsWhat does the -B-D in UB25-B-D mean?
B is the electrical module (SPST NO dry reed switch) and D denotes the Dieseline mode - a piston tuning that suits diesel, oil, and other heavier fuels rather than the standard water configuration.
Will the UB25-B-D work on diesel and water?
Yes. The D variant uses a Nylon piston compatible with both diesel/oil and water service. Standard (non-D) UB25-B uses a glass-reinforced polypropylene piston tuned for water.
Can I mount this upside down?
Yes. The UB25 series mounts in any orientation including upside down, in horizontal or vertical pipework. The magnetic piston return is gravity-independent.
What is the trigger flow?
On a slowly rising flow the switch trips at 1.5 L/min +/-15%. On a slowly falling flow it resets at 1.2 L/min +/-15%. Both figures are for the standard piston.
Is it suitable for PLC control circuits?
Yes. The SPST NO reed contact is rated 240V AC / 200V DC at 1 amp resistive - ideal for PLC inputs and general control circuits. Not suitable for direct inductive loads.