GO Fill|GO-VI77669971
GO Filter Head Mechanical Differential Pressure Indicator GO-VI77669971
Tax excluded. Shipping calculated at checkout
GST (10%) is calculated at checkout. Tax invoices provided with all orders.
Contact for live availability
Our inventory signal hasn't refreshed today. We update twice daily but the latest reading is stale.
Email sales@goind.com.au or call 07 3204 2240 for live availability.
Ships from Brisbane warehouse. Standard delivery 2-5 business days Australia-wide.
VISUAL FILTER ALERTS WITHOUT THE ELECTRICAL HASSLE
Mechanical differential pressure indicator for GO Fill filter heads. Visual alert at 2.2 bar (32 PSI) tells you when your filter element needs changing.
No guesswork
You know the drill: filters clog slowly, flow drops gradually, and by the time you notice the pump's labouring, half your morning's gone chasing air locks. This indicator gives you fair warning. A spring-loaded piston sits in the filter head. When the element loads up with dirt and differential pressure hits 2.2 bar, the piston pops clear of the housing. You see the flag, you swap the cartridge, job done.
Dead simple install
Threaded port on your GO Fill filter head (GO2214-047 and similar). Wind the indicator in, tighten, walk away. No wiring to run, no power to tap, no calibration routine. The spring does the work. When pressure drop falls after you fit a fresh element, the piston resets itself. Set and forget until the next service interval.
Features & Benefits
Key Features
- Clear visual indication of filter element status
- Standard actuation at 2.2 bar (32 PSI) differential pressure
- Compatible with FILTER GO heads (e.g., GO2214-047)
- Promotes timely filter element replacement
- Acts as mounting base for electrical output module (GO-VIE77536550)
- Robust mechanical design for industrial use
- No power required for operation
| Electrical Output | None (Base for GO-VIE77536550 module) |
| Standard Actuation ΔP | 2.2 bar (32 PSI) |
| Type | Mechanical/Visual |
| Required Base | GO2214-047 |
| Indication Type | Visual (Red Button Pop-Up) |
| Required Power | None |
Shipping & Dimensions
Ships from Brisbane warehouse. Standard delivery 2-5 business days.
Downloads
Compare
Compare Similar Products
None (Base for GO-VIE77536550 module)
—
—
2.2 bar (32 PSI)
—
—
Mechanical/Visual
—
—
GO2214-047
—
—
Visual (Red Button Pop-Up)
—
—
None
—
—
Frequently Asked Questions
Can't find your answer?
Contact UsWhat is the GO Fill differential pressure indicator?
A mechanical gauge that screws into GO Fill filter heads. When the filter element clogs and pressure drop reaches 2.2 bar, a spring piston pops up to alert you.
Which filter heads does it fit?
GO Fill filter heads, specifically GO2214-047 and compatible housings with the threaded indicator port. Check your filter head spec sheet or ask sales if unsure.
Does it need power or calibration?
No. Pure mechanical spring action. Install it once, forget it until the flag pops. No batteries, no drift, no annual checks.
What happens after the indicator pops?
Change your filter element. Once the new element is in and pressure drop falls, the piston resets itself automatically. No manual reset button.
What warranty and support do I get?
12-month warranty covers the indicator mechanism. Filter elements are consumables and not covered. For fitment advice or bulk orders, contact sales@goind.com.au or 07 3204 2240.