GO Fill|JYB-1
GO FILL PUMP 240V AC 15lpm Gear JYB-1
Tax excluded. Shipping calculated at checkout
GST (10%) is calculated at checkout. Tax invoices provided with all orders.
Contact for live availability
Our inventory signal hasn't refreshed today. We update twice daily but the latest reading is stale.
Email sales@goind.com.au or call 07 3204 2240 for live availability.
Ships from Brisbane warehouse. Standard delivery 2-5 business days Australia-wide.
15 L/MIN OIL TRANSFER ON MAINS POWER AT A FAIR PRICE
240V AC gear pump for oil transfer, 15 L/min flow rate, DN25 (1 inch BSP F) connections, 12 bar max pressure. Compact workhorse unit for workshop and field use.
Workshop-grade gear pump
The JYB-1 uses a simple gear mechanism to move oil at 15 L/min through DN25 fittings. It runs on 240V AC, so it suits permanent workshop installs or mobile setups with a generator. Max pressure is 12 bar, which covers most drum-to-drum or drum-to-sump transfers without drama.
Oil only, not a diesel pump
This unit is rated for petroleum-based oils (lube, hydraulic). Not suitable for diesel, petrol, or corrosive chemicals. If you need diesel transfer, look at the dedicated fuel pump range. For oil batching or machinery top-ups, this does the job cleanly.
Features & Benefits
Key Features
- Flow rate 15 L/min
- 240V AC mains power
- DN25 (1 inch BSP F) connections
- Max pressure 12 bar
- Suitable for oil transfer
- Gear pump design
- Compact unit for workshop mounting
Benefits
- Mains power suits permanent workshop installs
- 15 L/min fills drum in reasonable time
- Standard BSP fittings, no custom adapters
- Gear mechanism means fewer wear parts than vane pumps
| Flow Rate | 15 L/min |
| Max Pressure | 12 bar |
| Voltage | 240V AC |
| Connections | DN25 (1 inch BSP F) |
| Fluid | Oil (lube, hydraulic, general petroleum) |
| Compact Footprint | fits benchtop or trolley mounting |
| Gear Design | simple to service, no vanes to replace |
Shipping & Dimensions
Ships from Brisbane warehouse. Standard delivery 2-5 business days.
Downloads
Compatible Products
Frequently Asked Questions
Can't find your answer?
Contact UsWhat is the GO Fill JYB-1 gear pump?
A 240V AC gear pump for oil transfer, rated 15 L/min at up to 12 bar. Compact unit with DN25 (1 inch BSP F) connections, suited to workshop lube and hydraulic oil dispensing.
What fluids can it handle?
Lube oils, hydraulic oils, and general petroleum-based fluids. Not for diesel, petrol, or water-based chemicals.
Can I run this off a generator?
Yes, provided the generator delivers clean 240V AC at sufficient wattage. Check the pump motor draw before connecting.
Is 15 L/min enough for workshop use?
For filling small drums or topping up machinery sumps, yes. If you're doing high-volume bulk transfers, consider a higher-flow unit.
What warranty and support comes with it?
12-month manufacturer warranty on defects. Seals and wear parts are consumables. For support or parts, contact sales@goind.com.au or 07 3204 2240.