Valves, Fittings and Accessories

Fuel-rated valves, couplings, swivels, suction spears, and pipe fittings

Fuel-rated valves, couplings, swivels, suction spears, and pipe fittings for tank and pump installations. Stocking Banlaw dry-break systems, Alfagomma quick-release couplings, pressure regulators, overfill protection valves, and static earthing equipment.

Fuel Rated

All Connection Types

Fast Dispatch

Technical Support

0

This collection is empty

Continue shopping

1

Match fittings to your pipe sizes

2

Specify fuel-rated materials

3

Plan for maintenance access

ABOUT THIS RANGE

Connect, control, and protect your fuel circuit

GO Fill stocks fuel-rated valves, quick-release couplings, swivels, suction spears, overfill protection valves, static earthing equipment, and pipe fittings for tank and pump installations. Brands include Banlaw, Alfagomma, Liquip, Morrison, and GO Industrial.

Banlaw dry-break systems

Banlaw dry-break nozzles and receivers provide sealed, spill-free tank filling — the coupling only opens when the nozzle and receiver are fully connected. Essential for high-frequency filling operations and sites with strict spill-prevention requirements.

Static earthing and overfill protection

Liquip static earthing reels and Morrison overfill protection valves provide the safety systems required for compliant fuel storage installations. Static earthing prevents ignition from static discharge during filling operations.

What is a dry-break coupling?

A dry-break coupling (such as Banlaw) seals both sides of the connection when disconnected — preventing fuel spills during connect and disconnect. The coupling only opens when the nozzle and receiver are fully engaged. Used for tank filling where spill prevention is critical.

Why do I need static earthing?

Fuel flowing through pipes and hoses generates static electricity. Without earthing, static discharge can ignite fuel vapour during filling operations. Static earthing reels connect the delivery vehicle to the storage tank, providing a continuous earth path that dissipates static charge safely.

What is an overfill protection valve?

A mechanical valve installed in the tank fill line that closes when the tank reaches a preset fill level — physically preventing overfilling. Required under AS1940 for tanks above certain capacities. Available in DN40 and DN50 sizes.

Need fittings for a tank or pump installation?

Tell us your tank model, pump setup, and pipe sizes — we'll specify the right fittings and accessories.

Get advice Contact Us

Valves, Fittings and Accessories